Showing posts with label O gauge. Show all posts
Showing posts with label O gauge. Show all posts

Friday, November 10, 2023

Wagons Roll!


My Stock
Over the past few years, I have slowly accumulated enough stock to run a small shunting layout, and over those same years I have been just as slowly trying to build them. During Covid my wife and I started building a pair of Slater’s pre-printed open wagon kits. But my wife got frustrated with the assembly of them. Tiny, hair thin springs and 12BA nuts of the sprung buffers were a bit much (let's face it they’re a bit much for a lot of people). So we shelved that idea. Once in a while, I’d look at the kits and clean up a few parts ready for the day when I’d assemble them. There alway seemed to be something else that I was working on though.
Well, the day came on Monday, and Tuesday. Wednesday and Thursday too, and by the time I sat down for a cuppa tea on Thursday afternoon. I had a complete, short, light railway-esque goods train.
This fills me with joy.
Some wagons need a trip to the paint shop of course, followed by a dash of weathering for all. But right now I am very happy. Very happy indeed.
I first thought about working on an O scale layout in my twenties. Long before the world of micro layouts, I had picked up a couple of wagons, including the Midland Railway brake van at a model railway exhibition. I adore that style of brake van. It absolutely screams “light railway” at me. 
The Mid-Suffolk Light Railway had something that was very similar. It may even have been an ex-Midland Railway one. I think I may even have had the Slater’s kit in 4mm scale/EM gauge too.
I bought many of the Oakwood Press and Wild Swan Books about several of England’s unique and obscure light railways, figuring that a model of such a light railway was the way into the “king of scales”. But ultimately back then, O scale was still too expensive for my wallet, and my flat was pretty small. But I’ve always wanted to work in O. 
As you probably know, I have other blogs out there where I’ve explored American O scale schemes. Here and Here.  But they haven’t got off the ground fully yet, and may never. 
But this. Just looking at this short train, all those memories come flooding back to me. I love it when the hobby awakens memories like this. Oh how I wish that I hadn’t got rid of all those books when I emigrated to the USA a quarter of a century ago. (I shudder to think how much it would cost to replace them now). There was so much inspiration in those.
This picture of that “goods train” just feels so good to me. It’s a culmination of years of dreams. Now I definitely need to build that layout.

Friday, November 3, 2023

Happy National Model Railroad Month

Yes, here in the US of A, the National Model Railroad Association (NMRA) took it upon themselves to declare November as “National Model Railroad Month”. Something I didn’t find out about until yesterday from a fellow modeller. Apparently it’s been going on since 2014. Which says a lot about the NMRA’s efforts to publicize it.
I vaguely remember taking part in a “take a model train to work day” a good few years ago, and being resoundingly ridiculed by some colleagues at work. So I have mixed feelings about it. I think most of the time we’re preaching to the converted, or shouting into a vacuum, (or both at the same time). 
I publish The Micro Model Railway Dispatch free e-zine, co-host The Micro Model Railroad Cartel podcast, and blog incessantly about any layout project I’m working on. I’m also taking a layout to the Granite City Train Show in St. Cloud, MN this month. So I think I do more than my fair share to publicize the hobby. 
Having recently returned from exhibiting at a local train show. I find myself full of enthusiasm and needing to do something. There’s a new project in 7/8ths inch to the foot scale on the horizon. But there’s a lot of scratch building required for that, and although I have a great concept for that scheme I don’t have a trackplan yet, and my unfamiliarity with such a huge scale causes me to doubt myself at times. This might be a longer term project.
So, just for fun the other day I pulled out one of my half-finished O scale Slaters Wagon kits. And finished it. Unbeknownst to me this was on November 1st. The first day of National Model Railroad Month. 
Co-incidence?
Co-incidence? Who knows?
Working the idea that any effort to publicize the hobby needs to be global. I thing we need to consider November as National Model Railway month as well. I have another four or five Slaters kits to finish plus some track from previously aborted projects. Perhaps I should take this opportunity to work on that longed-for O scale project.



Sunday, February 28, 2021

How do you know when to stop when you don't know how far you can go?

 Sorry for the long title but it seems apt to describe todays work on the locomotive.

As I have said before. One of the main problems working in English O scale in the USA, is the ordering of items from the UK. Small items can cost more to ship than the item itself costs. Larger items can be just plain expensive to mail over. 

To that end I've been working with what's to hand here in the States, things I can get from my local hobby shop. This loco is based on a AHM/Rivarossi Plymouth switcher. I intend to use solid blocks of wood as dumb buffers instead of buying nice sprung buffers from the UK.

So when it came to the W-irons, Axlebox and springs I had no choice but too scratch build them. Technically that's not true, I could have raided a slaters wagon kit I have, but then I would have had to scratch build them to replace those I stole in making this loco.

So with the snow coming down at a good rate of knots this morning, I knew I had a day free to attack the job. So having no idea how it would go, I blundered on using what I had around me.

Stage 1. I had a good stock of 1mm styrene strip and sheet and would use this as the basis of the items

Stage 2. I used the aforementioned W-iron assemblies from the Slaters kit as a guide for the measurements.
2mm x 1mm was a tad overscale, but as this is not an exact scale model, I was good with that.

Stage 3. The W-irons went together easily, and I quickly got to the axle boxes..
Simple is best, and a suggestion of them was enough. They were created by laminating some 2.5mm and  half round sections. I was beginning to get confident.

Stage 4. Was I too confident? I knew I had to attack the leaf springs next. Once again using styrene that I had to hand, I measured up the leaf springs on the Slaters kit and just glued the lengths of .4mm x 1.5mm strip together. My confidence was high so it didn't't seem too much of an ordeal.

Stage 5. Once one leaf spring assembly had been fixed in place, I felt as if there was no stopping me! I was reaching new levels of scratch building abilities.  

Stage 6. Four completed Axlebox assemblies that only need to be trimmed and fitted in place. They will do the job admirably I think.  

I have a sign on my refrigerator door. A phrase I live my life by. "Live begins at the end of your comfort zone". This little project was far, far beyond my comfort zone, having only just started in O scale and never scratch built any rolling stock in O before this loco. Sure, it's not perfect. It's not totally to scale, but it's a pretty good representation and it will be right for the locomotive, and you can't say fairer than that.

Sunday, February 21, 2021

Loco building in O scale part three

The weather gifted me another chance to get some work done on my DS499 model today. I have been cutting away at the chassis weigh block for days and days, trying to remove it. It was a slow job. and four sessions and four track cutting discs later it was gone. Which meant that I could move on to the next task. The construction of the bonnets.
Weight block. Gone at last!
Having spent four days trimming that weight down, there was no way that I was going spend any further time on removing any more of it to get a more accurate shape for the bonnet over the engine. The first task was was to create the radiator. This was some simple laminations of styrene and plastruct HO scale chain link fencing for the grille. Once painted, I'm sure they'll look quite passable.

After that it was a simple task to cut the bonnet to shape and size. Overall, I think it looks OK. Though a simple extra detail like some louvres on the side of the bonnet would help lift the model a tad. I might be able to fashion something for that out of quarter round styrene rod, if some can be found that is the right size.
A little fettling to get the bonnet fitting properly and all should be good.

I think the locomotive will end up with the requisite character ,
even if it's not a slavish copy of the original.

Next job then, will be to make the bonnet for the other end. Now I've done one, the other should be a piece of cake. I really do hope that once I have a crew inside the cab they will hide that other piece of weight. Because I'm most certainly not keen on cutting it off too.


Saturday, February 13, 2021

Ennui fighting.

 Oh my. 

July. 

July 11th. That was when I last posted to this blog. Now seven months later, I'm posting again.

Ennui is a terrible thing. I started off this project with such great enthusiasm. The excitement was palpable. Things were really going to move on this project. The scheme was going to set the O scale world  alight. 

Then nothing.

The problem was I needed a locomotive to drive the project, (excuse the pun). I needed something small and quirky. Something to grab viewers attention at a show, and I couldn't find anything. Things stalled and I sought inspiration elsewhere in other projects.

Then quite by accident. Whilst searching for something else entirely. I discovered a conjectural drawing and photographs of the Southern Railway (England) Lansing Works shunter DS499. Small and most decidedly quirky. I got the feeling this was exactly what was needed for the layout.

Another consideration for any projects of mine here on the left hand side of the Atlantic Ocean. Is that they need to use materials predominantly from the USA. Shipping charges can sometimes be quite exorbitant, and often I've asked myself. "How much more than the cost of the item are you prepared to pay  to get the items here?"
That meant using one of these. The AHM Rivarossi Plymouth 4 wheel switcher to power it.

It's a very nice unit. Quiet and smooth running. There is also a six wheel version that I think was made by Roco. It is nowhere near as good as this one, much noisier and with a much bigger weight inside that takes up all the cab space.
Being a US O scale model, it's built to a smaller scale and larger loading gauge than the British prototype. The wheelbase of the unit scales out to about 8' 10", compared to the approximately eight feet of the actual loco. I was willing to live with that. Though the overall dimensions of the footplate are way in excess of my subject and needed to be trimmed down. So I set to with my trusty razor saw to bring it more into line. A very enjoyable task.

When finished, I was left with a motor bogie. I kept some of the footplate so I'd have somewhere to fix the new one to.

So far, so good then. Those two vertical lumps on the weight block really need to go. The central one sits in the space occupied by the cab, so it could be obscured by a loco crew. The other, that held the donor loco headlight has to go. 
Removing the weight is not an option as in addition to helping with current collection and adhesion, also appears to hold the axles and gears in place.
A good start then. All I will probably need to order from the UK will be Axlebox/W-irons, couplers ad buffers. Though dumb buffers could also be used for such a quirky locomotive I think.
Is this the end of the fight with ennui?
We'll see. It's a good start.




Friday, June 12, 2020

In the beginning...

There was O gauge.
Even though my first proper model railway experience was with a OO scale Hornby Freightmaster train set I was given for Christmas in 1976. The first model railway item that I remember, was an O scale coach that a dentist in town had. 
As a child, I had a dental condition called Hypomineralisation, where my baby teeth were chalk like and broke easily (or so I am told). I made many visits to dentists over the years to deal with this condition and the aftermath. 
This gentleman had some O gauge carriages on display in his waiting room and I latched on to them. I can clearly remember holding onto a coach for dear life as I underwent some tooth removals. I think he even let me take it home for a while as I recouperated.
The first model railway item I remember may have been something like this

There’s no doubt about it. O gauge does feel different. Sure, OO scale is nice and it’s relatively small, so you can get plenty in a small space. It’s a grand starting point for the model railway enthusuiast.
But O is different. Items have a heft and feel that OO items don’t have. An item of rolling stock really does click as it goes over a track joint. Sprung buffers really do give way as stock bumps up against each other. 
I have wanted to model in O for many years. From when I was growing up in England through to living in Minnesota now. I even have a couple of US outline items of rolling stock hidden away in a drawer somewhere that were waiting for a project. 
But over the years, I’ve come to realize that even though I live in the USA, American trains mean little to me, and I’m better off modelling what I’m familiar with. 
Those who know me, are aware of my many model railway blogs, made for charting the progress of layouts. The good and the bad. This one will be much the same. 
I do have another project on the go right now with an exhibition deadline to meet. So, for a while this blog will be a place of musings and cogitation about what I’ll do. 
Nothing is set in stone yet. I have some ideas. Some quite interesting ones. So we’ll see where it all goes.

I think I’m going to build me a station (or a garden shed)

Right now, the temptation is getting a bit too much to resist. Wingham Canterbury Road calls too strongly. These stills from the Pathé newsr...